A main is down. Here is how we work it.
This page is for the public works director, the utility superintendent or the engineer who just got the call. We dig the break, repair it and put the road back, and your operators keep what is theirs: the valves, the notices and the water quality sampling.
For a water system or town with a broken main, we provide the excavation side of the emergency: open the ground at the break, expose the pipe, make the repair and restore the road, with 24/7 emergency service. In a true emergency we typically mobilize within the hour. Isolating the main, notifying NJDEP and customers, and the water quality sampling that lifts a boil advisory stay with the water system, and the NJDEP guidance behind those duties is on our water main break page.
Who does what at a break
A break is quicker when everyone knows which part is theirs. This is how we split it, and it follows where the rules put the duties. The notification and sampling requirements fall on the water system, not on the contractor.
| Job | Who has it |
|---|---|
| Close valves and isolate the break | Your operators. It is your system and your valve exercise records. |
| Call NJDEP, the mayor and clerk, and customers | The water system, on the clocks set in the NJDEP manual. |
| 811 and marking the other utilities | Called in before we dig. For an emergency dig, see NJ utility damage law. |
| Open the ground, expose the pipe, shore and dewater | JWSR. |
| Make the repair or replace the section | JWSR, to the specification and materials your system requires. |
| Disinfection, flushing and laboratory sampling | Set by your system and the NJDEP manual. We coordinate the work around it. |
| Backfill, temporary and permanent restoration | JWSR. See right-of-way restoration. |
The NJDEP Water Main Break Guidance Manual defines the break types, the notification deadlines and the sampling table. We summarize them for homeowners on the water main break page and link the manual there rather than repeat it here. For the service itself, see water main work. If a main is breaking now, use our 24/7 emergency page.
What happens when you call
1. You tell us where and what
Street and cross street, pipe size and material if you know them, whether the road is municipal, county or state, and where your isolation valves are.
2. We mobilize
We answer 24/7, and a crew starts moving.
3. Mark-out and traffic
Utilities get marked before the machine goes in, and the work zone is set up for the road it is on.
4. Expose and find the failure
We open the ground, keep the trench safe, handle the water and expose enough pipe to see the failure and the pipe either side of it.
5. Repair
The repair is made to the material and method your system specifies. Where the break and your operators allow it, NJDEP treats a repair made under pressure with full circle clamps or sleeves as a low pressure event, which needs no advisory or sampling.
6. Hand back and restore
The repaired section goes back to your system for disinfection, flushing and sampling, and we backfill and restore the road to the standard on the permit.
What to have ready when you call
None of this has to be complete to call. We would rather start the conversation with half of it than wait for all of it.
- The location, with the nearest cross street or hydrant.
- What you know about the pipe: diameter, material and age, even if approximate.
- Which valves you have closed, and any that will not close.
- Whether the road belongs to the town, the county or the state, since that sets the permit and the restoration spec.
- Who on your side is the contact on site, and who approves the repair method.
Where this fits with the rest of our work
Main repair sits next to the work we do on water and sewer mains, hydrants and fire service lines, and next to our work for prime contractors. How a New Jersey town buys work, including the bid and quotation bands, is on how NJ towns hire contractors. Main work is quoted against the job, since a number on a page would be a guess. Call the office and we will tell you straight whether the job is the right size for us.
Common questions
Do you repair water mains for towns and water systems?
Yes. We repair and replace water mains and the valves and connections on them, and we do the road opening and restoration that comes with it. For homeowners the work is the service line from the curb to the house.
How fast can you get to a break?
We offer 24/7 emergency service, and in a true emergency we typically mobilize within the hour.
Who notifies NJDEP and our customers?
The water system does. The NJDEP Water Main Break Guidance Manual puts the notification, advisory and sampling duties on the system, and we link it on our water main break page.
Can a main be repaired without losing pressure?
Sometimes. NJDEP's manual defines a low pressure event as a main repaired under pressure with full circle clamps or sleeves while water keeps flowing from the rupture, and says it needs no notification, advisory or sampling. Whether a given break allows that is a call for your operators and engineer on the day.
Who does the disinfection and sampling after the repair?
The repair is disinfected and flushed to the standard your system specifies, and samples go to a New Jersey certified drinking water laboratory. The sampling and the decision to lift an advisory are the water system's. We coordinate our work around them.
Who restores the road after a main repair?
We do, to the standard on the permit or by your engineer. On a state highway that standard is set by NJDOT. On a town road it is the town's. Our right-of-way restoration page covers the general standards.
How does a town buy emergency work from you?
Our page on how NJ towns hire contractors covers the bid and quotation bands and what a contractor needs in place. Call the office and we will tell you straight whether the job is the right size for us.
Sources
- NJDEP Water Main Break Guidance Manual (March 2021)
- NJDEP Water Supply & Geoscience: Emergencies & Security
- N.J.A.C. 16:25-7.3, NJDOT utility accommodation: safety, construction and highway restoration
General standards, not a substitute for your permit, your specification or your engineer. Last reviewed 2026-11-16.
Three steps, no runaround
Call or send the form
Call us at 862-268-2510, or tell us about the job online. Emergencies jump the line.
Free estimates when you know what you want done
We look at the ground, tell you straight what it needs, and give you a fair, upfront price. When we have to find the problem or design the fix (camera inspection, site evaluation, design), that's a paid visit, credited toward the job if you hire us.
We do the work
Markouts and permits handled. We dig, backfill, restore, and walk the finished job with you.
Serving northern & central New Jersey
Main down, or about to be?
Call us and tell us where. We answer 24/7.







